Have you ever wondered why Aerogarden plants look abnormal or dead? Gardeners make different decisions regarding their plants’ growth and survival for various reasons. So, can you repot Aerogarden plants to bring the plants alive? People must know the specific answer to this question before transplanting plants.
Aerogarden plants can be repotted and require no prior experience. It has some simple procedures. Gardeners find this technique most effective for maintaining plants’ proper growth and longevity. By following some rules of repotting, the plants can remain in their natural appearance.
Apart from this, one must know about some significant factors while transplanting Aerogarden Plants. These will allow anyone to do this job perfectly.
Table of Contents
- 7 Reasons Why You Need To Repot Aerogarden Plants:
- 1. When The Roots Become Closed Or Exposed
- 2. To Remove From The Site Of Germination
- 3. Owing To Make Plants Heat Resistant
- 4. When Ants Attack The Root
- 5. To Prevent Root Rot
- 6. To Save Space
- 7. When The Plants Become Dense
- How To Repot Aerogarden Plants: 6 Steps Guide
- Step 1: Collect Required Tools
- Step 2: Gather Fertile Soil
- Step 3: Take Plants Out Of The Pot
- Step 4: Cut The Root Ball If Necessary
- Step 5: Place The Plant In The New Pot
- Step 6: Put The Plant Pot In A Lighted Place
- Related questions:
- Can You Repot AeroGarden Plants To The Soil?
- How Long Do AeroGarden Plants Last?
- Can You Repot Hydroponic Plants To The Soil?
- What Do You Do When Your AeroGarden Plant Is Too Big?
- Conclusion:
7 Reasons Why You Need To Repot Aerogarden Plants:
Even if you know a little about the requirements of transplanting Aerogarden arbors, there are many things that one does not know. Therefore, a gardener should know some other vital reasons to repot plants. This is also essential even for those thinking about creating such a garden.
1. When The Roots Become Closed Or Exposed
Rooting of plants is nothing new. But it has a substantial contribution to stunting plant growth. Apart from this, roots emerging or emerging above the soil are equally responsible. When an Aerogarden arbor’s roots become encrusted, it begins to silently shorten the plant’s life.
Again, the roots exposed above the ground get direct sunlight, which destroys the plant’s nutrients. The only way to protect arbors from these conditions is to re-transplant them with new soil.
2. To Remove From The Site Of Germination
After planting Aerogardens seeds in a container, it needs to be transferred to a separate container when the new plant grows. The soil where the seed germination occurs is slightly different and unsuitable for plant growth.
Moreover, people use small pots for seed germination, which is unsuitable for plant propagation. Repotting a plant while it is still growing is likely to kill it. So transplanting at an early stage is a good idea.
3. Owing To Make Plants Heat Resistant
Plants need heat, no doubt about it. However, abnormal heat stress can have a significant effect on arbors. Sometimes the temperature rises very high. In this situation, transplanting is an effective solution to protect the plant from this heat stress.
Remember to keep the roots as cool as possible during this time. In this case, gardeners can place arbors in containers with relatively less heat. It is an excellent solution among the most effective ways to fight the heat.
4. When Ants Attack The Root
Ant attack on Aerogarden arbor roots is nothing new, but it is pretty damaging. Ants slowly destroy the bases, causing the roots to lose their strength. In this case, remove the entire arbor from the pot and use a natural solution to kill the ants. But always avoid using chemical ingredients.
One can use detergent and lemon juice to prevent the ants. Besides, one needs to be careful about not storing excess water in the planter. Ants also build nests in damp places.
5. To Prevent Root Rot
Some wrong steps in caring for Aerogarden arbors can lead to the rotting of its roots. But when its roots start to rot, there are signs of understanding that something is happening inside. These problems are usually caused by placing plants in the wrong tub.
Besides, if the root is overwatered and accumulates, it is the cause of the rotting of the roots. The only solution, in this case, is to change the container. Place the arbor in a container with the necessary holes to drain excess water.
6. To Save Space
It is possible to save some space by repotting the tree. When a seedling has sprouted from a potted seed, transfer it to a unique pot as soon as possible. As this will ensure proper growth of Aerogarden arbors, it will also provide pot space while the gardener is thinking about preparing the soil for other seeds there.
When one transplants the growing arbor into its suitable container, the previous container space is saved and ready to be used for other purposes. Care must be taken in this case in the tub because the young roots may be torn off by inadvertence.
7. When The Plants Become Dense
When Aerogarden arbors become too dense, their growth gets stunted. Sometimes gardeners keep many plants in the same pot. When these get older, they tend to thicken and prevent average growth. In this case, one can repot some arbors. Each plant must be allowed to grow evenly to ensure individual development.
Leave some extra space around the arbor to allow enough light and air. In this case, depending on the growth of the plants, please choose the appropriate container where they can grow independently and healthily.
How To Repot Aerogarden Plants: 6 Steps Guide
Plant transplantation is a relatively new technique for rejuvenating plants. Regarding plant repotting, Christensen, a researcher, said in “Reader’s Digest” (1), ‘it is a simple way to restore dying plants with some quick steps.’ This is why I arrange a quick and safe guide to report Aerogarden plants.
Step 1: Collect Required Tools
To repot Aerogarden plants, a gardener must gather the necessary equipment first. When doing this for the first time, be sure to know from the list below which items one must keep in the collection:
- Fertile soil;
- Water;
- Scissors;
- Pot.
Step 2: Gather Fertile Soil
Collect some fertile soil for the container you want to report to the arbor. People can find such fertile soils in the garden. But if not available, they can collect it from a local store. Buy the required soil according to the pot size, keep it in the planter, and moisten it with enough water.
Step 3: Take Plants Out Of The Pot
Now carefully take out the desired arbor from the existing container. Be careful not to cut any of its roots accidentally. If you feel the root is weak before pulling it out, pull it out slowly. However, if one pulls the whole tree by the root, it is likely to come out properly.
Step 4: Cut The Root Ball If Necessary
Once removed, notice the roots. A few roots may quickly emerge, which are generally not active. It is best not to keep all these roots. Cut them off without damaging the plant with a pair of scissors. Be careful not to cut active roots when cutting. Trim all such roots. Gardeners can even cut off the ones that came out of the container.
Step 5: Place The Plant In The New Pot
Place the arbor in the new pot filled with some fertile soil. Remove some soils from the center of the planter and plant the plant. Then spread the rest of the soil slowly on the roots. Keep doing the same until all the soil is covered. Add the soil and press lightly on the root-soil. Add more soil if needed.
Step 6: Put The Plant Pot In A Lighted Place
Now place the container in a lighted place and ensure that the area has enough sunlight. But do not place it with solid light; it may weaken the seedling. A study in the book “The Hydroponic Culture Of Plants” shows (2) that tomato plants can grow well at 20°-30° during the day and 15°-20° at night. Hence intense heat is considered harmful to plants and vegetables.
Related questions:
Can You Repot AeroGarden Plants To The Soil?
Generally, gardeners can place the AeroGarden plants in soil, but they must have careful planning. Besides, it has some other requirements. Keep the herbs gardeners want to transform to the soil with that environment for a few days before repotting. The arbors will adapt to the environment. Most plants get an almost dead appearance after being placed in the soil from the planter, but this is not a cause for concern.
The dying appearance of lettuce and herbs is short-lived. At first, the leaves and twigs become weak but later become fresh. Some plants take 1-2 weeks to refresh entirely. Take care of the plant at this time by keeping it away from excess sunlight.
How Long Do AeroGarden Plants Last?
According to the type of AeroGarden plants, their durability varies. Some arbors last up to 3 months. Among the shortest-lasting plants is lettuce. However, fruit or vegetable plants last for about 9 months. Besides, the herbs also live for a long time. Apart from the type of plants, their survival depends significantly on proper care. The least durable herbs have an average shelf life of 2 months.
Arbors that last less time can be kept less in the garden. Instead, keep medium to large vegetable arbors in the park. Although they naturally come with a long shelf life, regular pruning, and care, they can give you the joy of eating vegetables or fruits for much longer.
Can You Repot Hydroponic Plants To The Soil?
Hydroponic plants can be transplanted into soil, but it requires much safety. Especially the time from lifting the plant from the pot to placing it in the ground is much more significant because the slightest carelessness can kill the plant. The arbor’s life and death depend on the gardener’s approach. Because hydroponics are grown in water, their roots are more delicate, thinner, and shorter.
Therefore, sometimes transfer to soil causes it to grow, and sometimes it dies. After preparing the soil properly, separate it from the water medium to reduce the water. Then place it on the ground and keep it light and airy. But do not let it overheat because this situation is not comfortable for it.
What Do You Do When Your AeroGarden Plant Is Too Big?
Some AeroGarden plants grow uncontrollably, but there is much that gardeners can do. Vegetable or fruit plants are medium, but herb plants are pretty tall. You can bring them under control by pruning. But it is impossible to control the roots because they grow lengthwise and widthwise.
A gardener should not suddenly cut off some roots, as this will undoubtedly lead to the death of the herbs. A reliable solution, in this case, is to place herbs that are likely to grow larger in relatively small containers.
Conclusion:
Hopefully, you got a clear answer to this question- can you repot Aerogarden plants? Repotting has a particular process mentioned in the article with a few steps. Moreover, any inexperienced person can become a skilled gardener by following the steps correctly.
Although Aerogarden arbors have entirely for repotting, one must consider whether the plants are suitable to be removed from the existing planter. Because any wrong steps can be harmful to the herbs, and they keep dying. Besides, the procedure requires time and attention since the safety of the plants is involved here.
References
(1) David, L. (2022, 8 10). How to Revive a Dead or Dying Plant: 10 Simple Steps. Reader’s Digest. https://www.rd.com/list/how-to-revive-a-dead-plant/#:~:text=organic%20fertilizer%20for%20all%20types%20of%20plants.%20Simply%20repotting%20your%20dying%20plant%20can%20also%20help.%20%E2%80%9CSoil%20can%20become%20depleted%20of%20nutrients%20over%20time%2C
(2) Guminska, Z. (1976). The Hydroponic Culture Of Plants. https://books.google.com.bd/books?id=jFjmAAAAMAAJ&pg=PA52&dq=How+much+light+do+tomato+plants+need?&hl=en&sa=X&ved=2ahUKEwj_tfXDjer5AhUr2nMBHYweDpcQ6AF6BAgLEAI#v=onepage&q=How%20much%20light%20do%20tomato%20plants%20need%3F&f=false

